A blender is an essential kitchen appliance that helps in making smoothies, soups, and sauces in no time. But, with regular use, it can get stained and smelly, making it unappealing to use. Don’t worry; you don’t have to buy fancy cleaning products to get your blender back to its shiny, clean state. With simple household items, you can effectively clean the stains and odors from your blender.
Today we will show you how to clean stained blenders with household products. From baking soda and vinegar to lemon and dish soap, we have got you covered. These methods are easy, cost-effective, and eco-friendly, ensuring that your blender is sparkling clean in no time. So, whether you have a plastic, glass, or stainless steel blender, get ready to say goodbye to stains and hello to a hygienic appliance.
How To Clean Stained Blender?
Here’s how you can clean a stained blender:
Fill the blender with warm water and a drop of dish soap
Fill the blender with warm water and a drop of dish soap. Close the lid and let it soak for a few minutes.
Blend the soapy water
Blend the soapy water for 30-60 seconds to help loosen any stuck-on food or stains.
Empty the blender
Empty the blender and rinse it thoroughly with warm water.
Use a cleaning solution
- If the stains are still there, try using a cleaning solution. You can mix baking soda and water or vinegar and water.
- Fill the blender with the solution and let it soak for 10-15 minutes.
- Rinse the blender thoroughly with warm water.
Scrub the stains
If the stains persist, use a sponge or cloth to scrub the inside of the blender, paying extra attention to the stained areas.
Dry the blender
After cleaning, be sure to dry the blender thoroughly to prevent water spots.
How To Clean Vitamix Blender Stains?
Here are some steps to clean Vitamix blender stains:
- Fill the blender jar with warm water and a drop of dish soap.
- Run the blender at high speed for about 30-60 seconds to create suds.
- Turn off the blender and let the solution sit for 5-10 minutes.
- Run the blender again at high speed for 30-60 seconds to rinse the jar.
- Repeat the process if necessary until the stains are removed.
- After cleaning, rinse the jar thoroughly with water and dry it completely.
How To Clean Cloudy Blender?
Cleaning a cloudy blender is a simple process that can be done with common household items. To clean a blender, first, unplug it and remove any remaining food or liquids. Fill the blender with warm water and a drop of dish soap, then run the blender for 30 seconds to a minute. This will help to loosen any stubborn stains or residue.
After that, rinse the blender thoroughly with warm water to remove any soap suds. If the blender is still cloudy, you can try cleaning it with a mixture of equal parts water and white vinegar. Fill the blender with this mixture and let it soak for about 10-15 minutes, then rinse the blender with warm water and dry it thoroughly before using it again.
How To Clean Rusty Blender Blades?
In order to clean rusty blender blades, you can mix equal parts of water and white vinegar in the blender, then run it on high speed for a minute. This should help to loosen and remove the rust. After that, you can rinse the blades thoroughly with warm water and dry them with a clean cloth. If the rust is still present, you can use baking soda and water to make a paste, then apply the paste to the blades and let it sit for several minutes.
Finally, rinse the blades with water and dry them. You can also consider using a specialized rust remover product, but be sure to follow the instructions on the label and wear protective gloves.
How To Clean Stained Butcher Block Countertops?
Cleaning stained butcher block countertops can be done with a combination of natural ingredients and proper maintenance.
Here’s what you’ll need:
- Warm water
- Mild dish soap
- White vinegar
- Baking soda
- Lemon juice (optional)
- A soft cloth or sponge
Steps:
- Wipe down the surface of the countertop with a damp cloth to remove any loose debris.
- Mix a solution of mild dish soap and warm water.
- Dip a cloth or sponge in the solution and gently scrub the surface of the countertop.
- Rinse the countertop with clean water and dry it with a soft cloth.
- To remove stubborn stains, mix a solution of equal parts white vinegar and water.
- Dip a cloth or sponge in the solution and gently scrub the stained area.
- For extra cleaning power, sprinkle baking soda on the stained area and then use the vinegar solution to scrub it.
- If the stain persists, try lemon juice. Apply the juice to the stained area and let it sit for several minutes. Then, scrub the area with a cloth or sponge.
How To Clean Cloudy Ninja Blender?
The process of cleaning a Ninja blender that has become cloudy is easy to perform. To do so, you’ll need to fill the blender jar with warm water and a few drops of dish soap. Put the lid on and blend at high speed for about 30 seconds. After that, rinse the jar thoroughly with water and let it air dry. If the cloudiness persists, you can repeat the process or mix equal parts of water and vinegar and blend for about 30 seconds, then rinse and dry. Remember to regularly clean your blender after each use to keep it in good condition and free of buildup.
How Will You Remove The Odor And Stains Of Blender?
To eliminate any foul smell and marks from a blender, these steps can be taken:
- Fill the blender halfway with warm water and add a drop of dish soap.
- Run the blender for about a minute, then let it sit for about 10 minutes.
- Rinse the blender thoroughly with warm water and let it air dry. If there are still stains, try using a mixture of baking soda and water to scrub the inside of the blender.
To remove the odor, you can fill the blender with equal parts water and white vinegar and let it soak for a few hours before washing it as usual. Another option is to add a few slices of lemon or a few sprigs of fresh mint to the water before blending to help neutralize any lingering odors.
- How To Clean Smoothie Blender? (With Common Household Items)
- How To Clean Nutribullet Blender Pitcher? (Professionally In No Time)
How Do You Clean An Old Dirty Blender?
To clean an old dirty blender, you can follow these steps:
Disassemble the blender
Remove the blade assembly and the jar from the base, and separate the lid and the ring from the jar. Wash the jar and the lid in warm, soapy water and rinse them thoroughly.
Clean the blade assembly
- Fill the jar halfway with warm water and add a drop of dish soap.
- Replace the blade assembly and lid, and blend the solution at high speed for 30-60 seconds. This will help to loosen and remove any stuck-on food particles.
- Rinse the blade assembly thoroughly under running water.
Clean the base
Wipe the base of the blender with a damp cloth, paying extra attention to the buttons and any crevices where dirt or food particles may have accumulated. You can also use a toothbrush to scrub away any stubborn dirt gently.
Dry the parts
Once you have cleaned them, let them air dry completely before reassembling the blender.
How Do You Clean A Discolored Blender?
Here’s how you can clean a discolored blender:
- Fill the blender with warm water and a drop of dish soap.
- Turn the blender on and let it run for a few seconds.
- Turn off the blender and let the soapy water sit for about 10-15 minutes.
- Rinse the blender thoroughly with warm water.
- For tough stains, you can try making a paste of baking soda and water and applying it to the stains. Let it sit for a few minutes, then rinse thoroughly.
- If your blender still has discoloration, you can try using white vinegar instead of soap. Fill the blender with equal parts water and vinegar, then let it run for a few minutes before rinsing thoroughly.
- For extra cleaning power, you can use a specialized cleaner made for blenders.
How Do You Clean A Burnt Blender?
Cleaning a burnt blender can be a challenging task. Still, it is important to keep it functioning properly and avoid any unpleasant odors. To clean a burnt blender, fill it with warm water and a few drops of dish soap. Let it soak for a few hours or overnight to loosen any stuck-on food or grime.
Then, use a non-abrasive scrub brush or sponge to remove any remaining food particles and stains. For stubborn burnt-on residue, you can fill the blender with a mixture of baking soda and water, let it soak for a few hours, and then scrub it clean. Finally, rinse the blender thoroughly with warm water and let it air dry before using it again.
Overall Thoughts
We hope this guide helped you learn how to clean stained blenders with household products such as vinegar, salt, and lemon without any hassle. If you have any other techniques that work for you, please feel free to share them in the comments section below. Also, if this post is useful for people, please share it with your family and friends on social media.
